1S Unboxing

1. Remove bike and accessories from box

Pull the bike up and out of the box.

There will be a couple items that are not attached to the bike, pull these out of the box.

2. Remove all packaging from bike parts

Use wire cutters to cut all zip ties.

Remove packaging carefully by cutting tape with scissors.

3. Separate out and identify all included parts

Frameset without front wheel

Front Wheel

Seatpost attached to saddle

A small box containing: 

    • Pedals
    • Bag with cable tip and reflectors
    • 2x Fortified Security Keys
    • 1x Wheel Unlocking Key
    • Bag with cable guide
    • User manuals for Shimano and Tektro components

If you also purchased lights, fenders, or a rack, you will find additional materials in a separate shipment.

4. Tool Checklist

Comes in the box: 

    • 2x Fortified Security Key
    • 1x Wheel Unlocking Key

 

 

  • Instead of the Wheel Unlocking Key above, you may have received the Security Shop Tool, which is used with one of the following:  3/8" open ended wrench, 3/8" ratchet wrench, or adjustable wrench.

Additional tools (required for assembly):

    • Allen key set
    • Wire cutters
    • Bike grease
    • 15mm open end wrench
    • Flathead screwdriver
    • Adjustable wrench or 3/8" ratchet wrench if you received the Shop Tool 

    Recommended Items:

      • Bowl (to place loose nuts and bolts in during assembly)
      • Something to wipe your hands on (paper towel or rag)
      • Bike pump
      • Latex Gloves
         BACK: WHAT TO KNOW BEFORE YOU BEGIN                                                                        NEXT: SEATPOST + SADDLE